Why Does My Ninja Blender Smells Like Burning? The Ninja Blender emitting a burning odour is likely the result of thermal runaway.
This is when the heating element of the unit reaches an excessive temperature and activates an internal safety switch that shuts it down.
The excessive heat emitted from the heating element in this state can then lead to an increase in the temperature of surrounding components, resulting in what appears to be a burning smell.
When you have a kitchen appliance that you rely on to make delicious smoothies and shakes, the last thing you want to experience is a burning smell coming from it.
If your Ninja blender has started emitting an unpleasant burning smell, then you’re probably wondering why this is happening.
In this article, we will discuss some of the common reasons why your Ninja blender might be smelling like burning and how to fix the issue.
Why Is There A Burning Smell Coming From My Ninja Blender?
The burning smell emanating from one’s Ninja Blender is likely due to the presence of an oxidizing agent, most likely in the form of electricity.
This voltage is generated when the electrical components of the appliance come into contact with a heat source, such as a motor or heating element, resulting in the release of odorous compounds.
The presence of this odoriferous material can then be observed when in close proximity to the machine.
Why Ninja Blender Smells Like Burning Plastic?
The phenomenon of the Ninja Blender emitting a burning plastic smell is indicative of a thermal decomposition reaction.
This reaction is caused by the high temperatures experienced during the blending process, which results in the breakdown of certain plastic components within the appliance.
The pungent odor is a result of numerous volatile organic compounds being released into the atmosphere, which are generated by hydrolytic degradation of thermoplastic polymers and oxidation of aromatic hydrocarbons.
Reasons Why Does My Ninja Blender Smells Like Burning?
If you have recently noticed that your Ninja blender is emitting a burning smell, there are several possible causes.
The most common is that the motor is overheating due to prolonged use or too much ice in the container.
Other causes could be a worn-out motor, clogged air vents, or a damaged electrical cord. Here are major reasons of burning smell from my ninja blender:
1. The Burning Smell Is Caused By The Base Windings:
The burning smell associated with Ninja blenders is caused by a problem with the base windings.
This is typically due to a malfunctioning motor, which results in overheating.
If your Ninja blender is emitting this odor, it is recommended that you immediately unplug it and contact customer service for assistance.
A defective motor can not only be a fire hazard but can also have other safety implications.
2. Blender May Broke Down:
If your Ninja blender is emitting a burning smell, it may be an indication that one or more of the components has broken down.
The motor, blades, or other parts may have overheated due to overuse or an electrical malfunction.
3. Blending For Too Long:
Blenders can become overheated if used for too long. This is especially true for Ninja blenders, which have powerful motors and require proper maintenance to keep running correctly.
If your Ninja blender smells like burning, it is likely due to the motor becoming too hot from running for too long.
To prevent this from happening, it is important to follow the manufacturer’s instructions and not blend for more than the recommended amount of time.
4. Insufficient Liquid Is Used:
Without enough liquid, the blades may become stuck, resulting in a burning smell.
To prevent this from happening, make sure that at least two cups of liquid are used with every mixture.
This will keep the blades from becoming stuck and help to avoid any unpleasant burning smells.
5. Some Part Worn Out:
It is important to identify the source of the smell in order to properly address the issue.
Common causes include a worn out drive socket, damaged motor, or loose wiring.
If you are able to locate the source of the smell, it may be fixable with parts replacement. If not, you may need to consider purchasing a new blender.
6. Blades May Stuck While Blending:
If your Ninja blender is emitting a burning smell, it may be due to the blades getting stuck while blending.
This is usually caused by blending for too long, or by blending something with a tough consistency.
To prevent this from happening again, make sure to blend in shorter intervals and avoid blending foods with hard ingredients.
7. Faulty Or Damaged Motor:
If your Ninja blender is making a burning smell, it could be caused by a faulty or damaged motor.
A malfunctioning motor can cause the blades to spin too fast and create heat.
This heat can cause the plastic parts of the blender to melt, which can produce an unpleasant burning odor.
If this is the case, you should stop using the blender immediately and contact the manufacturer for a replacement.
8. Excessive Use Of Hard Materials For Blending:
When using a Ninja blender, it is important to be aware of the type of materials that are being blended.
This can lead to a burning smell and could even damage the motor of the blender if not addressed quickly.
It is important to monitor the type of materials being used in the Ninja blender and ensure that it is not being overused.
9. Your Ninja Blender May Overheat:
If you own a Ninja blender, you may have noticed a burning smell when using it.
This is usually because the blender has overheated due to extended use or over-processing of ingredients.
To avoid this issue, it is important to give your Ninja blender regular breaks during use and to not overfill it with ingredients.
Additionally, it is important to make sure that the power cord is properly connected and that the power switch is off when not in use.
10. Overloading The Blender:
If you’re noticing a burning smell coming from your Ninja blender, chances are it’s due to the motor being overloaded.
This can happen when too much food is put into the blender at once, or if you try to blend something that is too thick.
To avoid this, it’s important to only fill your blender up to the maximum fill line and to use the pulse setting for thick mixtures.
Does Ninja Blender Overheat?
When examining the question of whether a Ninja Blender is prone to overheating, it is important to consider the internal components of the appliance and their respective capacities.
The motor and its associated circuitry, in particular, must be considered to ascertain any potential heat-related issues.
How Do I Get The Smell Out Of My Ninja Blender?
Proper maintenance of your Ninja Blender is key to preventing a burning smell.
Regularly checking the condition of the blades and cleaning them can go a long way towards preventing a burning smell from developing.
Add Proper Liquid Before Blending:
If your Ninja blender is emitting a burning smell, it may be due to not enough liquid being added to the recipe.
Blenders require enough liquid to create the friction necessary to blend the ingredients together.
If not enough liquid is added, the blades can overheat and cause a burning smell.
Warm Your Ninja Blender:
To help prevent this from happening, make sure to warm up your blender before use.
This can be done by running it on a low speed for a few seconds before adding ingredients.
Taking the time to warm up your blender can help ensure that it will last longer and work more efficiently.
Use The Proper Amount Of Food:
When using a Ninja Blender, it is important to remember that using the right quantity of food is essential for a successful blending experience.
Using too much food can cause the motor to overheat and potentially cause a burning smell.
To prevent this, make sure to follow the manufacturer’s instructions for the quantity of food per blending cycle, and never fill the blender beyond the maximum line.
Remove The Destroyed Blade:
This can occur when something harder than the blade, such as a nut or a seed, gets stuck in between the blades.
To fix this, first unplug the blender, and then carefully remove the damaged blade from the container.
Do Not Overfill Your Ninja Blender Jug:
It is important to never overfill the jug of your blender when using it, as this can cause the motor to overheat and lead to a burning smell.
To ensure the safety of your blender, fill the jug no more than halfway with ingredients, and increase blending time if needed.
Summary: Why Does My Ninja Blender Smells Like Burning?
It is important to know why your Ninja blender smells like burning and how you can fix this problem.
Why Does My Ninja Blender Smells Like Burning? The most common cause of a burning smell is motor failure, which requires the assistance of a professional repair service.
It can also be caused by a clogged internal filter or overheating due to overuse.
To prevent these issues from occurring, make sure to follow the instructions in your user’s manual for proper cleaning and maintenance.
Why Does My Ninja Blender Smell After Washing?
This is likely the result of residual water droplets or moisture remaining on certain components after the cleaning process, such as the motor base or blades.
Is It Normal For Ninja Blender To Smoke?
Given the rigorous nature of the Ninja Blender, it is not unusual to observe a certain degree of smoke emission during normal operation.
This is due to the high levels of kinetic energy associated with its blades, which can cause friction and heat buildup.