Master Your Kitchen: Where Tech Meets Taste!

Why Does Blendtec Blender Smells Like Burning?


Why Does Blendtec Blender Smells Like Burning

Affiliate Disclaimer

As an affiliate, we may earn a commission from qualifying purchases. We get commissions for purchases made through links on this website from Amazon and other third parties.

The burning smell in the Blendtec blender is likely due to an accumulation of residual carbon deposits which have been generated as a result of the intense frictional forces involved with the high-speed motor and blade assembly.

Blendtec blenders operate under extreme temperatures, any combustible material present can be easily ignited, resulting in an unpleasant burnt odour.

Why Does Blendtec Blender Smells Like Burning? Over the years, Blendtec blenders have become a popular kitchen appliance due to their power and efficiency.

However, many users report that their Blendtec blender emits an unpleasant burning smell.

While this smell can be alarming, it’s important to understand why the blender is emitting this odor, and what can be done to prevent it in the future.

In this article, we will discuss the causes of your Blendtec Blender smelling like it’s on fire and how to fix the problem.

Why My Blendtec Blender Emit Smell Like Burning ?

It could be due to the overheating of the motor or the blades becoming dull and grinding against each other.

If you suspect that your Blendtec Blender is overheating, try unplugging it and letting it cool down before plugging it back in and trying again.

Is It Normal For Blendtec Blender To Smell Like Burning?

When a Blendtec Blender is used for the first time, it is normal for it to smell like burning. This is due to the motor breaking in and is nothing to be alarmed about.

If the smell persists, consult the manufacturer’s instructions or contact customer support for further assistance.

Causes Why Does My Blendtec Blender Smells Like Burning?

If you have recently noticed that your Blendtec Blender  is emitting a burning smell, there are several possible causes.

The most common is that the motor is overheating due to prolonged use or too much ice in the container.

It’s important to identify and address the issue as soon as possible to avoid further damage to the blender and to prevent any safety hazards.

1. The Burning Smell Is Caused By The Base Windings:

The burning smell associated with Blendtec Blender s is caused by a problem with the base windings.

If your Blendtec Blender  is emitting this odor, it is recommended that you immediately unplug it and contact customer service for assistance.

A defective motor can not only be a fire hazard but can also have other safety implications.

2. Blender May Broke Down:

The motor, blades, or other parts may have overheated due to overuse or an electrical malfunction.

To determine the cause of the smell and the extent of any damage, it is recommended to unplug the appliance and contact a certified technician for further assistance.

3. Blending For Too Long:

Blenders can become overheated if used for too long. This is especially true for Blendtec Blender s, which have powerful motors and require proper maintenance to keep running correctly.

If your Blendtec Blender  smells like burning, it is likely due to the motor becoming too hot from running for too long.

Be sure to give your blender a break in between blending sessions so that it can cool down and avoid further damage.

4. Insufficient Liquid Is Used:

When using a Blendtec Blender, it is important to ensure that enough liquid is used in the mixture.

To prevent this from happening, make sure that at least two cups of liquid are used with every mixture.

5. Some Part Worn Out:

If your Blendtec Blender  is emitting a burning smell, it could be indicative of a part wearing out or malfunctioning.

It is important to identify the source of the smell in order to properly address the issue.

6. Blades May Stuck While Blending:

If your Blendtec Blender  is emitting a burning smell, it may be due to the blades getting stuck while blending.

This is usually caused by blending for too long, or by blending something with a tough consistency.

To prevent this from happening again, make sure to blend in shorter intervals and avoid blending foods with hard ingredients.

Additionally, check the blades of your blender to ensure that they are not bent or damaged in any way.

7. Overloading The Blender:

This can happen when too much food is put into the blender at once, or if you try to blend something that is too thick.

To avoid this, it’s important to only fill your blender up to the maximum fill line and to use the pulse setting for thick mixtures.

If the burning smell continues even after following these steps, it may be time to have your Blendtec Blender  serviced.

8. Damaged Couplers May Cause Burning

Couplers are the small pieces of plastic that connect the motor base to the blade assembly.

If these become worn or cracked, the friction created by blending can cause them to overheat and produce a burning smell.

If you notice any damage, immediately replace them with new couplers.

9. Dirty Or Damaged Blades:

Over time, the blades can become dull and dirty, which can cause them to heat up when in use.

Additionally, if the blades are damaged, they may be grinding against the container or other components of the blender, creating friction and heat.

If you suspect that the blades are the issue, it is important to thoroughly clean and inspect them for any signs of damage.

10. Buildup Of Bacteria In Blendtec Blender Chamber:

A common cause of a burning smell from a Blendtec Blender  is the buildup of bacteria and mold inside the chamber.

This can happen when food particles, moisture, and warm temperatures create an ideal environment for the growth of bacteria and mold.

Additionally, it is important to clean and dry out the Blendtec Blender  after every use to prevent future bacterial and mold growth.

How Do I Get The Smell Out Of My Blendtec Blender ?

To get rid of the smell, you should first disassemble the blender and clean all parts with warm, soapy water.

Once everything is cleaned and dried, blend a mixture of water and vinegar for 30 seconds to help remove any remaining residue.

Finally, replace the blender parts and blend a few ice cubes for 30 seconds to flush out any remaining odor.

With proper care, your Blendtec Blender  should be free of odors.

How To Prevent Your Blendtec Blender From Burning Smell?

Proper maintenance of your Blendtec Blender  is key to preventing a burning smell.

As with any appliance, it’s important to clean the Blendtec Blender  between uses and make sure that any food particles are removed from the blades.

Additionally, if your blender begins to smell like burning, it’s important to check the blades for any damage or debris that could be causing the problem and clean or replace them if necessary.

Regularly checking the condition of the blades and cleaning them can go a long way towards preventing a burning smell from developing.

Final Remarks: Why Does Blendtec Blender Smells Like Burning?

Why Does Blendtec Blender Smells Like Burning? Blendtec blenders can sometimes emit a burning smell, which can be caused by several factors.

These range from a dirty blade to an overloaded blender or worn-out motor.

It is important to take the necessary steps to identify and address the source of the burning smell before it causes any further damage to your appliance.

By following some basic troubleshooting methods, you can eliminate the source of the burning odor and keep your Blendtec blender running smoothly.


Can You Overfill Your Blender Jug?

It is important to never overfill the jug of your blender when using it, as this can cause the motor to overheat and lead to a burning smell.
To ensure the safety of your blender, fill the jug no more than halfway with ingredients, and increase blending time if needed.

Can You Use Your Blendtec Blender For Too Long Continuously?

Using your Blendtec Blender  for too long continuously can lead to unpleasant smells of burning.
To avoid this, it is important to limit your use of the Blendtec Blender for no more than 20 minutes at any given time.

About the author

Latest posts